In the first half of 2026, exports from the main steel districts grew by 1.9%. Imports decreased by 9.2%.
The Italian steel industry is holding up on foreign markets, but at very different rates across regions.
In the first half of 2026, exports in value of steel products, pipes and other products from the first transformation of steel from the top ten Italian steel hubs reached almost 6.9 billion euros , compared to 6.7 billion in the same period of 2025, marking a growth of 1.9% .
The data for the top ten hubs is more dynamic than the overall export trend: overall, they fell by 0.1% in value in the half-year, compared to a 0.2% increase in volume . This slight decrease, explains the siderweb Research Office, is due to lower sales prices.
The rankings confirm Brescia at the top. Udine maintains second place, and Cremona third. However, the rankings show significant changes: Milan gains two spots, Reggio Emilia gains one, while Bergamo loses two and Lecco loses one .
Brescia strengthens its leadership. Milan climbs.
The Brescia hub remains Italy's leading steel hub in terms of export value, recording growth of 7.1% . This increase allows Brescia to widen its lead over Udine: the gap between the top two hubs increases from 74.7 to 96.5 million euros .
Udine maintains second place with a 5.3% increase in exports. However, Cremona recorded the strongest growth among the top ten hubs, consolidating its third place: +12.6%.
Mantua , fourth in the ranking, saw a 5.8% drop in exports. Milan saw significant growth, rising two places with a 4.5% increase. Vicenza retained its sixth position, with export values essentially unchanged compared to the first half of 2025.
The most negative figure in the ranking is that of Bergamo , which recorded a 19.5% contraction in exports and dropped two positions. On the other hand, Reggio Emilia recorded one of the most significant increases, with an 11.1% increase, and rose one position.
Terni grew by 7.8% and maintained its eighth place. Lecco rounded out the top 10, with exports down 3%.
Taranto , home to the Acciaierie d'Italia steelmaking hub, is also outside the top 20 in the first half of 2026. Exports fell by 86.5%. In 2025, the value had fallen by 40.3% compared to the previous year, stopping at 42 million euros (362 million in 2022).
Imports: €500 million less from the top ten hubs
The picture is changing for foreign purchases. In the first half of 2026, imports from the top ten steel hubs decreased by 9.2%, from 5.8 to 5.3 billion euros : approximately 500 million euros less in a year.
At the national level, the contraction is even more marked: imports of steel products, pipes, and other products from the first steel transformation decreased by 13% in value and 15.9% in quantity.
The different dynamics between European and non-EU suppliers is particularly significant. Imports from non-EU countries decreased by 22.5%, equal to approximately 1.6 million tonnes, while those from EU countries decreased by 2.1%. In the context outlined by the analysis by the siderweb Research Office, the reduction in non-EU purchases is also linked to the full implementation of the Carbon Border Adjustment Mechanism (CBAM) .
35.bi-mu has closed: technology, conferences, and networking for the 26,000 professionals attending
35.BI-MU , the international biennial exhibition dedicated to the industry manufacturing metal-cutting and metal-forming machine tools, robots, automation, digital and additive manufacturing, auxiliary and enabling technologies, closed on Friday 16 October. The event has been running since Tuesday 13 October in the exhibition halls of fieramilano Rho. Promoted by UCIMU-SISTEMI PER PRODURRE and organized by EFIM-ENTE FIERE ITALIANE MACCHINE , BI-MU offered a broad overview of the sector's international offerings, confirming its position as a key event for manufacturing industry operators, offering them a rich calendar of meetings and numerous opportunities and initiatives designed to foster networking. The 26,000 professional operators present at 35.BI-MU were able to closely observe the offerings of the 448 companies present , 30% of which came from abroad : Austria, China, Finland, Germany, India, Ireland, Spain, Switzerland, Taiwan, Bulgaria, Korea, France, Japan, Ireland, the Netherlands, the United Kingdom, Switzerland, and the USA. The international offerings on display in the pavilions also attracted foreign operators, who accounted for 6% of the total , representing 80 countries , including Germany, Switzerland, Spain, France, Finland, Sweden, Poland, Romania, Portugal, Slovenia, Austria, the United Kingdom, the United States, Canada, Brazil, China, South Korea, Taiwan, Japan, India, Turkey, Vietnam, Uzbekistan, Ukraine, and Egypt. Among them were the 120 guests—including qualified end users, trade analysts, and journalists —of the incoming mission organized by UCIMU-SISTEMI PER PRODURRE, in collaboration with the Italian Trade Agency (ITA) and the Ministry of Foreign Affairs and International Cooperation. ICE-Agenzia and the Ministry of Foreign Affairs and International Cooperation, again in collaboration with UCIMU-SISTEMI PER PRODURRE, also promoted the organization of the Start-up Area , which included around twenty companies whose offerings integrate well with the production of capital goods. The event also welcomed a delegation of representatives from the European Community's Machinery Unit who, together with representatives from CECIMO, visited the exhibition and met with UCIMU's top management for an open discussion on issues of interest to the sector. With the new Associations & Network Hub initiative, BI-MU has reserved a dedicated space for manufacturing business associations representing key sectors, both supply chain and local, with the aim of encouraging dialogue, understanding, and the exchange of useful information among the stakeholders involved in the fair. In addition to networking, considerable attention was paid to collateral initiatives for in-depth cultural exploration of specific themes, aimed at the event's diverse audiences: exhibitors, visitors, students, researchers, education professionals, the media, and institutions. Over 50 events were organized as part of BI-MU by the organizers and institutional partners. Among the meetings hosted in the BI-MU Arena, the most well-attended was the Inaugural Conference chaired by Riccardo Rosa , president of UCIMU-SISTEMI PER PRODURRE, with: Valentino Valentini , Deputy Minister of the Ministry of Business and Made in Italy, Giovanni Bozzetti , President of Fondazione Fiera Milano, Simona Greco , Hosted Exhibitions Director of Fiera Milano, Luca Durante , Head of the Capital Goods Office of ICE-Agenzia, Gian Piero Cutillo , Co-General Manager of Leonardo, and Roberto Vavassori , Executive Director of Brembo and president of ANFIA, moderated by Paolo Bricco , Correspondent of Il Sole 24 Ore. The two special forums dedicated to the Aerospace & Defense and Energy sectors attracted great interest, analyzed through the direct testimony of the production and operations directors of some of the main international players and the CEOs of several Italian SMEs. In terms of training, the VLF4EU (Virtual Learning Factory for EU) International Conference was particularly significant, with the participation of around thirty researchers from Denmark, France, Slovenia, Spain, Sweden, and Italy. The dialogue between young people and the world of work was explored in depth at the meeting " Value, Future, Impact. Work According to the New Generation, " organized by ANIPLA with the patronage of the UCIMU Foundation. These conferences were part of the Skills Area meetings calendar. Set up in pavilion 24, the Skills Area also hosted several initiatives promoted by UCIMU Academy and FONDAZIONE UCIMU , including ROBOTGAMES , the automation and robotics competition aimed at secondary school students, now in its second edition. Approximately 4,000 students , accompanied by their professors, were accredited in this space. During the four days of the exhibition, they took self-guided tours of the exhibitors' stands, guided by tutors—all students from ITS INCOM —to observe the latest-generation technologies up close. The Additive Future Lab , an initiative promoted by AITA, the Italian Association of Additive Technologies, made its debut at 35.BI-MU. This initiative is dedicated to ITS students and additive manufacturing technologies. The awards ceremony was hosted at the association's stand within AMITALY , the BI-MU area dedicated to additive manufacturing. A brand new addition to the 35th edition was the BI-MU FutureTech Award , designed to recognize the best innovations presented at the fair in the categories of mechanical innovation, digitalization, and sustainability. And to celebrate 70 years since the first BI-MU was organized, EFIM, in collaboration with the Historical Archives of the Fondazione Fiera Milano, has created “ 70 Years of Machine Tools ,” a photographic exhibition that collects, in no particular order, some testimonies of the machine tool biennial from its beginnings to the present day. The manufacturing industry's interest in the event is also measured by activity on the bimu.it website and digital channels (LinkedIn, Instagram, Facebook, X, YouTube). Between January 1, 2025, and October 16, 2026, the bimu.it website attracted 80,000 unique visitors (+7% compared to 2024). The BI-MU social media community now has 12,419 registered followers (+14%) compared to the end of the last BI-MU edition. Of all the event's profiles, LinkedIn has the most active activity, followed by Instagram. While waiting for 36.BI-MU, scheduled for October 10-13, 2028, the next appointment for industry professionals is EMO MILANO 2027, from October 4-8, 2027, also at fieramilano.
Industriale.it certification