DOOSAN PUMA Puma 2600SYII 2018
- Condition: used
- published: 17/02/2026
- 26IND48565
Technical data
- Condition: used
- Year: 2018
Description
Doosan Puma 2600 SYII CNC milling and turning center with Fanuc i-series control and accessories.
The machine has been used very little, with approximately 1,930 hours of operation, so it is in like-n ...
Doosan Puma 2600 SYII CNC milling and turning center with Fanuc i-series control and accessories.
The machine has been used very little, with approximately 1,930 hours of operation, so it is in like-new condition.
Accessories:
-2 Tool holders for 25x25 external tools
-1 Double tool holder for 25x25 external tools
-1 Tool holder for 25x25 frontal machining
-2 Tool holders for internal turning tools (drill bars) with a diameter of 50 mm
-1 Double tool holder for 32 mm internal turning tools
-1 Tool holder for the cutting tool
-1 Double tool holder on the right for the external tool (subspindle).
-1 Double tool holder on the left for the external tool (main spindle);
-4 ER-32 radial live tool holders (X-axis).
-5 ER-32 axes live tool holders (Z-axis);
-1 ER-32 radial live tool holder (X-axis) with through-coolant supply.
-1 ER-32 axes live tool holder (Z-axis) with through-coolant supply.
-1 three-jaw chuck for the main spindle with 1 set of hardened jaws and 2 sets of soft jaws.
-1 three-jaw chuck for the subspindle with 1 set of hardened jaws and 2 sets of soft jaws.
-1 chuck for the main spindle, each with a 50 mm diameter spindle and 30 mm.
-1 chuck for the subspindle, each with a 50 mm diameter spindle and 30 mm.
-1 set of reduction sleeves for diameter 50 (10 pieces).
-1 set of reduction sleeves for diameter 32 (7 pieces);
- 1 set of adapters for live tool holders (ER 32 collet, Weldon, milling attachment).
- Emulsion rinsing device on the main spindle for automatic jaw cleaning.
- Device for automatically cleaning the clamping jaws with compressed air.
- Additional high-pressure pump for internal coolant supply (hole drill drilling).
- Automatic machine shutdown function (the machine also reactivates the main switch to interrupt the power supply).
- Connection for Iemca automatic bar feeder.
Other similar products
Loading...
Industriale.it certification